Follow Us on LinkedIn Follow Us on YouTube

  1. CLR 1396 / CLH 6930

    Extremely strong adhesive. Remains strong at elevated temperatures. A high performance, room temperature curing, 100% solids, epoxy adhesive. This product bonds to a wide variety of substrates and was specifically developed to seal porous metal substrates. CLR 1396 / CLH 6930

  2. CLR 1415 / CLH 6220

    Low Density, Flame Retardant, 120°C Operating. A two component, low density, room temperature curing, flame retardant, epoxy potting/casting compound. CLR 1415 / CLH 6220

  3. CLR 1510 / CLH 6580

    Low viscosity, RT cure. Excellent thermal shock resistance. A low viscosity adhesive with excellent thermal and mechanical shock resistance. CLR 1510 / CLH 6580

  4. CLR 1730 / CLH 6372

    Heat and chemical/fuel resistant adhesive/laminating. A two component heat and chemical resistant epoxy laminating system. CLR 1730 / CLH 6372

  5. CLR 1796 / CLH 6580

    UL 94-V0 system for potting and casting small electronic parts that require thermal shock and thermal cycling performance. A two component, low viscosity, room temperature cure epoxy system. Material has yellow card UL94-V0 rating, and contains non abrasive fillers suitable for meter mix dispense. CLR 1796 / CLH 6580

  6. CLR 1876 / CLH 6631

    Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1876 / CLH 6631

  7. CLR 1946 / CLH 6500

    Product is recommended for potting and encapsulating applications. A two component, room temperature cure semi-flexible epoxy system. The system was developed for potting / casting of electrical and electronic components. Its use of non abrasive fillers and convenient 1:1 ratio by volume, makes it ideal for use in machine dispensing equipment. CLR 1946 / CLH 6500

  8. CLR 3080 / CLH 6372

    General Adhesive room temperature cure. Resistant to Toluene, Ethanol, Aviation Gas and Diesel Fuel. A low viscosity, two component, chemical resistant epoxy system. Post cured material has excellent resistance to most petroleum based fuels and solvents during exposure at ambient and elevated temperatures. CLR 3080 / CLH 6372

  9. CLS 9420

    Structural Adhesive. This compound gels quickly at elevated temperatures with excellent adhesion to most substrates. A single component structural adhesive. This compound gels quickly at elevated temperatures with excellent adhesion to most substrates. CLS 9420

  10. XID 1681 / XHD 1652

    A two component polyurethane casting system. Product has long pot-life and cures to a hardness of 65 Shore D. XID 1681 / XHD 1652

  11. XR 11483 / CLH 6260

    Excellent fuel resistance. Suitable for automotive fuel sensors. A two component, chemical resistant epoxy casting system. The cured product has improved thermal conductivity for applications where heat dissipation from thermally sensitive devices is required. Cured product is resistant to Ethanol, Gasoline, and Diesel, when exposed to these chemicals at ambient or elevated temperatures. XR 11483 / CLH 6260

  12. XR 52092 / XH 62093

    1:1 machine dispense adhesive. Adhesive for bonding synthetic aggregates to metal. A medium viscosity, room temperature curing, two component epoxy adhesive. Product was developed with improved thin film set time when bonding metal substrates. XR 52092 / XH 62093

  13. XRD 1014 / XHD 1015

    High temperature clear epoxy. An unfilled, heat resistant, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material exhibits high physical strengths and modulus with moderate post cure temperatures. XRD 1014 / XHD 1015

  14. XRD 1018 / XHD 1019

    1:1 Mix Ratio, 130°C Operating, General Purpose, Low cost. A two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. Its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets UL94-V0 in house flammability testing. XRD 1018 / XHD 1019

  15. XRD 1321 / CLH 5185

    Machine dispense friendly, tough, casting epoxy system. Increased flexibility when compared to CLR 1831 family. A two component, low stress, heat cure epoxy system specifically developed for use on instrument and power transformers. The product if filled with non-abrasive fillers, making the product suitable for machine dispensing. The cured material exhibits excellent thermal stability and thermal cycling endurance. Product meets UL 94-HB flammability requirements. XRD 1321 / CLH 5185

  16. XRD 1347 / XHD 1348

    The product cures to a shore hardness of 50 A, low viscosity, soft system. A two component, very flexible epoxy system. XRD 1347 / XHD 1348

  17. XRD 1501 / CLH 6090

    4:1 Ratio, soft system. A two component unfilled, flexible epoxy system. Product features low viscosity, long pot life and cures to a shore hardness of 70A. XRD 1501 / CLH 6090

Results 21 - 37 of 37

Filters